HDMI vs DisplayPort vs DVI vs VGA – every connection explained

display_connectors_0

Most monitors will have a range of different inputs available, and your PC or laptop will also use different outputs, so it can be difficult to decide which is the best one for you to use. Under most general circumstances, you might be able to get away with using whichever cable you have lying around, but if you have more specific needs, such as carrying audio or using high resolutions or refresh rates, you’ll need to be more discerning in your choice of cable. We outline the different cables below and give you a few different usage scenarios to help you decide.

HDMI 

HDMI, or ‘High-Definition Multimedia Interface’ to use its full name, is one of the most common connections. You’ve probably come across it on your television, set-top boxes, tablets, laptops and games consoles.

HDMI is unique among the many connection options in that it’s able to carry both uncompressed video and uncompressed audio. This is why it’s become the connection of choice for most multimedia devices as it’s a one cable solution (like SCART but so much less annoying). Other benefits of HDMI include functions such as HDMI-CEC (HDMI Consumer Electronics Control), which allows you to control numerous devices with one remote. For example, connect a soundbar to your television through a HDMI-CEC compatible port and the soundbar can turn on and off with your television and be controlled by a single remote.

hdmi_type

 

HDMI has seen numerous revisions since its inception in 2002. Its most common version, used in most consumer devices at present, is 1.4 but there’s a newer, more exciting 2.0 specification now becoming more prominent. The main difference between the 1.4 and 2.0 specifications focus around bandwidth available. HDMI 1.4 has a bandwidth maximum of 10.2 Gbps/s whereas the HDMI 2.0 tops out at 18 Gbps/s.

The reason that bandwidth becomes important is due to the advent of 4K content. Due to the limited bandwidth of HDMI 1.4, only 24fps was possible at 4K resolution (3,840 x 2,160). Now, thanks to the extra bandwidth available in the 2.0 specification, up to 60fps at 4K resolution is possible.

Colour depth is also another area where the new HDMI 2.0 specification gains some advantages. Where 1.4 was limited to 8-bit colour, HDMI 2.0 has 10-bit or 12-bit available. This is important for when High Dynamic Range (HDR) content becomes available.

HDR can be described as the ratio between the lightest and darkest parts of an image. Typically, with standard dynamic range, you’re losing detail at either end of the light spectrum. Expose a scene for the shadow detail and you end up with blown out highlights, or expose for the highlights and you lose shadow detail. HDR allows a greater range of detail across the full light spectrum.

You’ve probably already come across HDR through photography. Most smartphones now have an HDR mode where they essentially take numerous images at different exposures and combine them. As HDR has become part of the Ultra HD standard, you can expect more Ultra HD Blu-ray content to take advantage. The likes of Amazon and Netflix are going to be streaming HDR content as well.

More often than not, if you’re connecting something to a television, HDMI will be your best, and likely only, bet. Most PC monitors will also include an HDMI input. The good news, where it comes to 1.4 vs 2.0, is that you don’t need to rush out and buy new cables. To take advantage of the 2.0 specification you just need both devices on each end of the cable to be 2.0 compatible. Any HDMI cable will do, and we’ve already seen that there’s no difference in HDMI cable quality.

active_hdmi

The one thing to look out for are the different HDMI connection sizes. Not only is there full-size HDMI (Type A), but you can come across Mini HDMI (Type B) and Micro HDMI (Type C), too. These are commonly found on portable devices such as tablets, camcorders and action cameras, where their physically smaller connections are required. You can either buy HDMI-Mini HDMI/HDMI-Micro HDMI cables or you can buy Mini/Micro HDMI adaptors so you can use your full-size HDMI cables.

DisplayPort

mini_displayport

Until HDMI 2.0 became a standard, DisplayPort had it beat when it came to high-resolutions. DisplayPort 1.2 has long been able to carry 3,840×2,160 resolution video at 60fps (or a refresh rate of 60Hz) and is the most common DisplayPort specification on most consumer monitors and devices now. This has 17.28 Gbit/s of bandwidth. A newer 1.3 specification is becoming more widely available, however, and this opens the floodgates to higher resolutions such as 7,680×4,320 (8K).

er_photo_149281

The main advantage of DisplayPort is the ability to output to multiple displays through Multi-Stream Transport (MST). You can do this by daisy-chaining compatible monitors over DisplayPort or by connecting a DisplayPort MST splitter to your single DisplayPort output on your PC or laptop. You have to work within the bandwidth limitations of whichever DisplayPort specification you’re using, such as two 1,920×1,080 monitors over 1.2 or two 3,840×2,160 displays over the DisplayPort 1.3 specification. As such, DisplayPort is often a great choice for those looking to use multiple monitors.

DisplayPort also has advantages where it comes to screen refresh rates through Adaptive Sync. This is what AMD has used for its Freesync implementation. Essentially this helps reduce screen tearing, which will be of particular interest to gamers. Like HDMI, some laptops and devices use Mini DisplayPort, so make sure you get the right cable.

DVI

DVI stands for ‘Digital Visual Interface’, and is another common connection found on PC monitors. Things can become a little confusing when you consider there are three different types of DVI. There’s DVI-A (analog signal), DVI-D (digital signal) and DVI-I (integrated analog and digital signal). Not only that, but DVI-D and DVI-I have single-link and dual-link versions. Nowadays, DVI-A is very uncommon, as it’s no better than VGA.

dvi

The differences between single-link and dual-link refer to how much bandwidth the cable can carry. A single-link DVI-D or DVI-I cable can carry 3.96 Gbit/s, which tops out at 1,920×1,200 resolution. Dual-link, on the other hand, physically has extra pins on the connectors, allowing a maximum bandwidth of 7.92 Gbit/s and 2,560×1,600 resolution.Although DVI is still a common connection, it’s becoming dated, so if you want to output a very high resolution you’ll need to use HDMI or DisplayPort instead.

VGA

8

VGA is the oldest of the four connections outlined in this article. It’s been around for decades, dating back to the days of thick, heavy CRT monitors of yesteryear. VGA stands for Video Graphics Array but can also be referred to as an ‘RGB connection’ or ‘D-sub’. While VGA can technically output to 1,920×1,080, the problem is that it’s an analog connection, so as you push the resolution higher you get image degradation as the signal is converted from analog to digital. Unless you absolutely have to, use one of the above connections instead of VGA.

Using a combination of HDMI, DisplayPort, DVI and VGA

6010a

Most motherboards and dedicated graphics cards will have multiple outputs. You can use a combination of these to output to multiple monitors. So if you have HDMI and DVI outputs, connect one monitor using HDMI and the other using DVI. As mentioned above, if you’re using DisplayPort and your graphics card or device supports Multi-Stream Transport, you can daisy-chain DisplayPort monitors, too.

Any questions regarding article give me a call. I am available M-F from 10:00am-6:00pm and Sat 11am-3pm. I also sell video cards with various connections to suit your needs.

CompGuyUSA                                                                                                      4620 W. Commercial BLVD. #7C                                                                          Tamarac, FL., 33319                                                                    compguyusa@gmail.com                                                                              Contact: (954) 228-7481

 

MACBOOK PRO 13 KEYBOARD REPLACE

Today in shop i replaced a keyboard and back light for Mac book Pro 13. When changing keyboard it is always a good idea to replace back light also in case it tears while disassemble. Here are some steps to take so that you can replace your keyboard without worry. This process takes some time to complete, so be sure to have a clean and clear work area with good lighting.

To begin make sure laptop is turned off completely. Once off turn over with laptop closed to see bottom cover. Then remove all screws, paying attention to where each screw goes.

Image 1/1: Remove the following ten screws:

Once all screws removed remove back cover.

First thing first, remove connector for battery along with screws. REMOVE BATTERY

20151120_102049 20151120_102201 20151120_102231 20151120_102242

Now that batter is removed we can start next with CD ROM Drive. 20151120_102330

With plastic Pry Tool lift Hard Drive Ribbon connector.20151120_102349

Next unscrew Hard Drive caddy then remove.20151120_102447 20151120_102454 20151120_102542

Slowly move ribbon so that its no longer on top of CD ROM Drive20151120_102600

Next with plastic tool remove CD ROM Ribbon, WiFi/Bluetooth Ribbon, Speaker connector and camera cable.

20151120_102623 20151120_102659 20151120_103037 20151120_103125

Next remove antenna cable and remove 5 screws to remove airport assembly and speaker.

20151120_103222 20151120_103400 20151120_103408 20151120_103415 20151120_103557 20151120_103627 20151120_103701

Once removed you should see 3 screws holding CD ROM Drive in place. Remove them ans remove drive.

20151120_103812 20151120_103823 20151120_103828 20151120_104001

Once removed you can remove speaker located under drive and remove assembly.20151120_104145 20151120_104204

Next we will remove 3 screws holding Fan and connector20151120_10461620151120_104630 20151120_104639 20151120_104737 20151120_104755

After removing fan we can then start on removing the rest of the connectors including display ribbon.

20151120_104348 20151120_104408 20151120_104455 20151120_104510 20151120_10452520151120_104901 20151120_104909 20151120_105041 20151120_105117

Next with t6 screwdriver remove Logic Board screw. 20151120_105248

carefully remove mic after removing screws then slowly remove Board and set aside on static proof mat

20151120_105315 20151120_105409 20151120_10555720151120_105657

Once board removed brace holing keyboard down with 2 screws20151120_10572320151120_105815

Now to remove keyboard back light. I didn’t bother being gentle with it because i’m replacing this part. In most cases you will have to replace it because they tear or separate. After removing you will be able to see all screws holding keyboard in place. including 3 screw holding mic

20151120_110232 20151120_110236 20151120_11061120151120_112359 20151120_112434

Remove keyboard then replace.

Reassemble in reverse order. GOOD LUCK!!!

IF YOUR HAVING ANY KEYBOARD RELATED ISSUES FEEL FREE TO GIVE ME A CALL OR STOP BY FOR YOUR FREE IN STORE ESTIMATE. I SERVICE ALL TYPES OF LAPTOPS AND DESKTOP WITH ALL TYPES OF ISSUES. I’M AVAILABLE ALL WEEK AND SATURDAYS.

CompGuyUSA

4620 W. Commercial BLVD. #7C

Tamarac, FL., 33319

compguyusa@gmail.com

Contact: (954) 228-7481

 

CHEAP DESKTOPS COMPUTERS FOR SALE

Here at CompguyUSA i repair all kinds of computers but also sell a lot. In these times everyone’s looking to have a reliable computer whether it be for working or for pleasure. This week we have a couple of computers for sale and at a reasonable price. If your looking for a computer that wont dissapoint call or stop by today and i can get you going.

In shop i sell Factory Spec referbished HP and Dell business class towers. Here are a few computers I am selling at the moment.

HP ELITE 8000 SMALL FORM FACTOR $200 (TOWER ONLY)

3 GHz
Intel Core 2 Duo
E8400 PROCESSOR
4 GB DDR3-SDRAM
160 GB HDD
Windows 7 Home PRO
HP ELLITE 8000
20151119_155716
20151119_112918
20151119_112450
*OUTER CASING MAY SHOW LIGHT SCRATCHES BUT INTERNALS ARE ALL RE-MANUFACTURED BY OEM.
HP ELITE 6200 PRO SMALL FORM FACTOR $350 (TOWER ONLY)
Intel Core i3 (2nd Gen) 2100 / 3.1 GHz
4GB DDR3 SDRAM
160 GB HDD
Windows 7 Home PRO
HP ELLITE 8000
20151119_162516
20151119_163323 20151119_162428 20151119_162607
*OUTER CASING MAY SHOW LIGHT SCRATCHES BUT INTERNALS ARE ALL RE-MANUFACTURED BY OEM.
IF YOU NEED A COMPUTER SERVICED OR JUST LOOKING TO GET SOMETHING MORE RELIABLE GIVE ME A CALL OR STOP BY FOR YOUR FREE ESTIMATE. 

CompGuyUSA

4620 W. Commercial BLVD. #7C

Tamarac, FL., 33319

compguyusa@gmail.com

Contact: (954) 228-7481

Compguyusa Review Referral from Mr. Biggs

Here at CompGuyUSA we make sure that our customers are well taken care of. We offer 1 day service for many of the repairs out there today, such as Virus removal, Screen Replacement, System Cleanup, just to name a few. If your having any kind of Computer issue don’t hesitate to give us a call at 954-228-7481.

CALL TODAY FOR YOUR FREE IN STORE ESTIMATE

CompGuyUSA                                                                     4620 W. Commercial BLVD. #7C                                                             Tamarac, FL., 33319                                                                           compguyusa@gmail.com                                                                               Contact: (954) 228-7481                                                                                                           Open: Mon-Fri 10AM – 6PM                                                                                                                Sat: 11AM – 3PM

Computer Services – CompGuyUSA – E-commercial

http://www.CompGuyUSA.com deals for your business.

$1 – Domain Names

$35 – Computer Repair Service Fort Lauderdale

S. E. O. from $199/Month plus Setup Fee

Serving the Fort Lauderdale Broward County area!

Comp Guy USA is not affiliated with, CompUSA.